Myenergi Zappi V2.1 EV Charger
7.4kW | Solar Smart Charger
Product Code: 9505885985684 | MPN: ZAPPI-2H22UB-G
SKU: ZAPPI-2H07UB-G
£124.10 under RRP
The myenergi zappi 2.1 is a 7kW solar EV charger for single-phase home charging, designed and built in the UK. It can charge your car from surplus solar or wind generation, from the grid, or a mix of both, using three charging modes: FAST, ECO and ECO+. The zappi has Wi-Fi and Ethernet built in, so you do not need a separate myenergi hub for app control.
Choose a tethered version with a 6.5m Type 2 cable and integral holster, or an untethered version with a locking Type 2 socket. Both come in black or white, and myenergi includes a CT clamp with a 5m lead in the box.
Specifications
| Model | myenergi zappi 2.1 (ZAPPI-2H07) |
| Power Output | 7kW (up to 7.4kW) single phase |
| Charging Current | 6A to 32A, variable |
| Supply | 230V AC single phase |
| Connector | Tethered Type 2, 6.5m, or untethered Type 2 socket with lock |
| Colours | Black or white |
| Charging Modes | FAST, ECO, ECO+ |
| Display | Backlit graphical LCD with multicolour LED |
| Connectivity | Built-in Wi-Fi and Ethernet (RJ45), plus myenergi wireless for harvi and eddi |
| RCD Protection | 30mA Type A RCD with 6mA DC protection |
| PEN Fault Protection | Built in (no earth rod needed on PME supplies) |
| Load Balancing | Dynamic, with the supplied CT clamp |
| OCPP | 1.6J (through the myenergi cloud) |
| Weather and Impact Rating | IP65, IK10 |
| Dimensions (H x W x D) | 439 x 282 x 122mm |
| Standby Power | 3W |
| Operating Temperature | -25°C to +40°C |
| Enclosure | PC/ASA |
| In the Box | Charger, colour fascia, CT clamp with 5m lead, cable protector (tethered), mounting template, fixings, manual |
| Compliance | CE and UKCA marked, Smart Charge Point Regulations compliant |
| Warranty | 3 years |
FAST, ECO and ECO+ Explained
FAST charges at full power from any source, like a standard charger. ECO follows your surplus solar output and tops up from the grid to keep charging going at the minimum rate. ECO+ charges only when enough surplus generation is available, so the car runs on renewable energy alone. The zappi works with solar PV, wind turbines and home batteries.
Smart Tariffs and the myenergi App
The myenergi app integrates with Intelligent Octopus Go. You can also set Octopus Agile price limits, use OVO Charge Anytime on the latest firmware, or set timers for any off-peak tariff such as Octopus Go, Next Drive or British Gas Electric Driver. The zappi also has an eSense input that can start charging from an economy-tariff signal.
The myenergi System
The zappi works alongside the myenergi eddi hot water diverter and the libbi home battery, sharing surplus energy between them in the order you set. A harvi wireless sensor (sold separately) lets you monitor generation or grid current without running a cable back to the charger.
Installation Requirements
The zappi needs a dedicated 32A Type B curve MCB and connects to TN (PME) or TT earthing systems. Cable entry is from the rear, bottom or side. A qualified electrician registered with a competent person scheme, such as NICEIC or NAPIT, should install it, including a separate surge protection device where the wiring regulations require one. If you have no suitable wall, mount the charger on an EV charger post.
Common Questions
Do I need solar panels to use a zappi?
No. In FAST mode, the zappi charges from the grid like any smart charger, and you can add solar later.
Does the zappi need a myenergi hub?
No. The zappi 2.1 has Wi-Fi and Ethernet built in.
What is the difference between the zappi 2.1 and the zappi GLO?
Both share the same solar modes and myenergi app. The zappi 2.1 has an LCD screen and button controls, while the zappi GLO swaps the screen for an illuminated body and runs from the app.
Shipping
Free standard UK delivery on most orders over £100. You'll see delivery options, costs and timescales at checkout before you pay. Some items are made to order or ship direct from the manufacturer, so they take longer. We email your tracking details once your order leaves us.
Returns & Warranty
Buying as a consumer? You can cancel within 14 days of delivery. We refund unused, unopened items in full. If you have opened or used an item, we may reduce the refund to reflect any loss in value. Business orders don't include change-of-mind returns, but we cover faulty or incorrectly supplied products for every customer.
The manufacturer sets the warranty, and the length varies by product. You'll find it in the specifications.
Installation & Compatibility
Will this charger work with my car?
Almost every EV sold in the UK and EU uses a Type 2 connector for AC charging. Check the connector type and charging power in the specifications against your car's handbook. Not sure? Email info@on-ev.com before you order and we'll check for you.
Who installs it?
A qualified electrician registered with a competent person scheme, such as NICEIC or NAPIT, must install your charger. We supply the charger, and your electrician confirms the supply, circuit, cable size and earthing protection your property needs.
Do I need a charging cable?
A tethered charger comes with its cable attached. A socketed (untethered) charger needs a Type 2 to Type 2 cable, which you can also use at public charge points. Our Type 2 cable length guide helps you pick 5m, 7.5m or 10m, or browse EV charging cables.
If anything here differs from the product specifications, the specifications apply.
Shop by category
Related products
Charging Time Calculator
See how long this charger takes to charge your EV. Based on 7.4kW output.
Save Charging Calculation
We'll only use this to follow up about your charger enquiry and the occasional offer. Unsubscribe anytime.
Want more detail? Use our advanced EV charging calculator →
Estimates based on 7.4kW AC charging with ~95% efficiency. Actual times vary by vehicle onboard charger limit, battery temperature, and state of charge.
Common Questions
Do I need an electrician to install an EV charger?
Yes. Use a qualified electrician registered with a competent person scheme, such as NICEIC or NAPIT. They check your supply, earthing and cable route, certify the work and notify your network operator where required. We supply the charger, so you choose your own installer.
How much does it cost to charge an EV at home?
It depends on your electricity tariff and how many miles you drive. On an off-peak EV tariff, home charging costs much less than public rapid charging. Work out your own figures with our EV charging calculator.
Should I buy a tethered or untethered charger?
A tethered charger keeps its cable attached, so you unhook it and plug in. An untethered (socketed) charger has a Type 2 socket, and you use your own cable. Choose tethered for speed each day, or untethered if you run more than one EV or want a tidier wall. Our tethered vs untethered guide covers the trade-offs.
Is a 7kW charger better than 3.6kW?
A 7kW (7.4kW) charger charges about twice as fast. It fills a 60kWh battery in around 8 hours, against about 16 hours at 3.6kW. Most UK homes and EVs can use 7kW on a standard single-phase supply, so pick 7kW unless your car or supply limits you.
Do I need planning permission for a home EV charger?
In most cases, no. Home EV chargers usually count as permitted development in the UK. Listed buildings, conservation areas and some flats can differ, so check with your local authority first if your home falls into one of those.
Can I charge my EV from solar panels?
Yes, with a solar compatible charger. It measures the surplus power your panels produce and sends it into your car instead of exporting it to the grid. Browse our solar EV chargers.
Which EV chargers work with Octopus tariffs?
Many smart chargers work with Octopus tariffs, and some are approved for Intelligent Octopus Go. Check the product specifications for tariff support before you buy.
“Perfect! Great price and quick delivery”
“Really happy with the service from start to finish. The team made getting my EV charger installed easy and straightforward. They were professional and kept me updated throughout the whole process, which I appreciated. The installation was done quickly and to a high standard. It’s great to deal with a company that’s reliable, knowledgeable, and clearly cares about doing a good job. I’d definitely recommend them to anyone looking to get an EV charger installed - excellent service and a genuinely positive experience.”
“Great price and as fast to deliver as others. Will be using again. Thanks!”
“Great service & brilliant updates & communication with Jago. He talked us through the workings of Ev charger & reassured us we could contact him with any issues that may arise. Electricians did a great job..very pleased with the service we received. Thankyou”
“Fantastic service . Installed quickly and friendly service . Everything was explained during the process . Thank you very much”
“Couldn't recommend more, had my Andersen Quartz installed by ON-EV. Installed within 4 days of my enquiry, turned up on time, and finished within 2 hours. Jago showed me how to use the app, and gave some good tips. Spot on!”
“I had a Hypervolt installed at my property. I was very impressed with the prompt service. It's so neat! Thank you for your professionalism and advice. I would most definitely recommend.”
“Had ON-EV install a new EV charger at my house and couldn't be happier with the service. From start to finish everything was straightforward and professional. Communication was spot on, they turned up when they said they would, and the installation itself was done to a really high standard. They took the time to explain how everything works and made sure I was happy before leaving. Charger looks great and works perfectly.”
“Couldn't recommend enough, quick and easy process! Big thanks to Jago for making it as smooth as possible, setting up the app and organising it all. Also the lads doing the work were polite as anything and couldn't have been more helpful.”
“Not a straight forward installation- Jago came out to view, discussed what was required, and charger options. Quick installation. Friendly and Professional Electrician, made a very neat job of wiring and fitting our unit. Highly recommend.”
“We needed an ev charger installation around 16 metres from our house that required a cable to be buried under a shared drive. Jago project managed the whole operation with a ground work team and electricians. I've got to say that I had no previous experience of this company but the support was excellent. I have no hesitation in recommending ON-EV especially when the installation is a bit tricky!”
“ON-EV provided me with an excellent service. They offer a range of EV chargers at various prices and the overall cost including installation was very reasonable. The installation was professional and efficient. After, I was shown how to use the device and the app. I highly recommend using their service.”
“great service, after an email enquiry got back to me really fast, sent photos and measured up, date to booking was faster than every other quote in had. Came when they said, completed work in the day, all work complete, very smooth process. highly recommend theses guys.”
“Very impressed with my Zappi installation at my home in Cheshire, would definitely recommend”
“Absolutely delighted with the charger we had fitted yesterday. A very tidy and prompt installation and professional service.”
“Great price and as fast to deliver as others. Will be using again. Thanks!”
“Really happy with the service from start to finish. The team made getting my EV charger installed easy and straightforward. They were professional and kept me updated throughout the whole process, which I appreciated. The installation was done quickly and to a high standard. It's great to deal with a company that's reliable, knowledgeable, and clearly cares about doing a good job. I'd definitely recommend them to anyone looking to get an EV charger installed - excellent service and a genuinely positive experience.”
“Perfect! Great price and quick delivery”