Easee One EV Charger
7.4kW | Built-In Type B RCD + PEN Protection
Product Code: 7090052315378 | MPN: 10523
SKU: EASEE-10523
£71.00 under RRP
Additional Items
-
RFID Access Control Fobs RFID key fobs for authorising charging sessions on Easee chargers. Allow charging without ap...
-
Replacement Front Cover for Easee Chargers Snap-on front covers for the Easee One, Charge Core, Charge Max and Charge...
The Easee One is a compact 7.4kW untethered smart EV charger for single-phase home charging, designed and made in Norway. It has a Type 2 socket that you can lock from the app to keep a cable fitted, so it works as an untethered charger or as a tethered one with your own cable left in place. The charger measures 256 x 193 x 106mm and weighs 1.5kg.
The Easee One has built-in DC fault detection and PEN fault protection, so most UK homes need no earth rod. It connects over Wi-Fi and a built-in eSIM, runs on the Easee app, and supports RFID access. Add the Easee Equalizer for solar charging and whole-home load management.
Specifications
| Model | Easee One (product no. 10523) |
| Power Output | 1.4kW to 7.4kW, single phase |
| Charging Current | 6A to 32A, dynamic |
| Supply | 230V AC, 50Hz |
| Connector | Type 2 socket, lockable in the app (cable not included) |
| Colour | Black as standard (white, anthracite, red and blue front covers sold separately) |
| Controls | LED light strip, touch button, RFID reader |
| Connectivity | Wi-Fi 2.4GHz, built-in eSIM (LTE Cat M1), Easee Link radio between chargers |
| App | Easee app (iOS and Android) |
| OCPP | 1.6 |
| RCD Protection | Built-in RCD, 30mA AC and 6mA DC (IEC 62955) |
| PEN Fault Protection | Built in (no earth rod needed) |
| Load Balancing | Up to 3 Easee chargers on one circuit; whole-home with Easee Equalizer |
| Solar Charging | With Easee Equalizer (sold separately) |
| Energy Meter | Built in, ±2% accuracy |
| Weather and Impact Rating | IP54, IK10 |
| Dimensions (H x W x D) | 256 x 193 x 106mm |
| Weight | 1.5kg |
| Operating Temperature | -30°C to +40°C |
| Earthing Systems | TT, TN-S, TN-C, TN-C-S |
| In the Box | Backplate, Chargeberry electronics unit, front cover, installation kit, opening tool |
| Compliance | RED, EMC, LVD, RoHS; Smart Charge Point Regulations compliant |
| Warranty | 3 years |
Tethered or Untethered
Out of the box, the Easee One works as an untethered charger: plug in a Type 2 cable when you charge and remove it afterwards. Switch on cable lock in the Easee app and the socket keeps your cable fitted, so it behaves like a tethered charger. Most cars need a 32A Type 2 to Type 2 cable for full 7.4kW charging.
Load Balancing and the Easee Equalizer
Up to three Easee chargers can share one circuit and fuse, balancing current between them over Easee's own wireless link, with no extra hardware. For whole-home load management, phase balancing and solar charging, add the Easee Equalizer. UK Equalizer kits include a meter and CT clamp, and solar-only charging starts once your panels export at least 6A of surplus.
Smart Charging in the Easee App
The Easee app schedules charging around your off-peak hours on any time-of-use tariff, such as Octopus Go or British Gas Electric Driver, and records energy use per session. You can manage RFID tags for shared driveways or workplaces, and the charger receives firmware updates over the air.
Installation Requirements
The Easee One needs up to 40A overload protection upstream, with Type A earth fault protection where the installation method requires it. It accepts cable up to 16mm², or 10mm² when looping through to a second charger, through four cable entries. The backplate goes on the wall first and the Chargeberry clicks into it. A qualified electrician registered with a competent person scheme, such as NICEIC or NAPIT, should install it. If you have no suitable wall, mount the charger on an EV charger post.
Common Questions
Does the Easee One have a Type B RCD?
It has a built-in RCD that detects 30mA AC and 6mA DC faults, to IEC 62955. Because the charger detects DC faults itself, a Type A RCD upstream is enough where the installation needs one, with no Type B RCD required.
Can I change the colour?
Yes. Easee sells white, anthracite, red and blue front covers that swap onto the charger.
Does the Easee One need Wi-Fi?
It works over Wi-Fi or its built-in eSIM, so it stays connected if your Wi-Fi drops.
Shipping
Free standard UK delivery on most orders over £100. You'll see delivery options, costs and timescales at checkout before you pay. Some items are made to order or ship direct from the manufacturer, so they take longer. We email your tracking details once your order leaves us.
Returns & Warranty
Buying as a consumer? You can cancel within 14 days of delivery. We refund unused, unopened items in full. If you have opened or used an item, we may reduce the refund to reflect any loss in value. Business orders don't include change-of-mind returns, but we cover faulty or incorrectly supplied products for every customer.
The manufacturer sets the warranty, and the length varies by product. You'll find it in the specifications.
Installation & Compatibility
Will this charger work with my car?
Almost every EV sold in the UK and EU uses a Type 2 connector for AC charging. Check the connector type and charging power in the specifications against your car's handbook. Not sure? Email info@on-ev.com before you order and we'll check for you.
Who installs it?
A qualified electrician registered with a competent person scheme, such as NICEIC or NAPIT, must install your charger. We supply the charger, and your electrician confirms the supply, circuit, cable size and earthing protection your property needs.
Do I need a charging cable?
A tethered charger comes with its cable attached. A socketed (untethered) charger needs a Type 2 to Type 2 cable, which you can also use at public charge points. Our Type 2 cable length guide helps you pick 5m, 7.5m or 10m, or browse EV charging cables.
If anything here differs from the product specifications, the specifications apply.
Shop by category
Related products
Charging Time Calculator
See how long this charger takes to charge your EV. Based on 7.4kW output.
Save Charging Calculation
We'll only use this to follow up about your charger enquiry and the occasional offer. Unsubscribe anytime.
Want more detail? Use our advanced EV charging calculator →
Estimates based on 7.4kW AC charging with ~95% efficiency. Actual times vary by vehicle onboard charger limit, battery temperature, and state of charge.
Common Questions
Do I need an electrician to install an EV charger?
Yes. Use a qualified electrician registered with a competent person scheme, such as NICEIC or NAPIT. They check your supply, earthing and cable route, certify the work and notify your network operator where required. We supply the charger, so you choose your own installer.
How much does it cost to charge an EV at home?
It depends on your electricity tariff and how many miles you drive. On an off-peak EV tariff, home charging costs much less than public rapid charging. Work out your own figures with our EV charging calculator.
Should I buy a tethered or untethered charger?
A tethered charger keeps its cable attached, so you unhook it and plug in. An untethered (socketed) charger has a Type 2 socket, and you use your own cable. Choose tethered for speed each day, or untethered if you run more than one EV or want a tidier wall. Our tethered vs untethered guide covers the trade-offs.
Is a 7kW charger better than 3.6kW?
A 7kW (7.4kW) charger charges about twice as fast. It fills a 60kWh battery in around 8 hours, against about 16 hours at 3.6kW. Most UK homes and EVs can use 7kW on a standard single-phase supply, so pick 7kW unless your car or supply limits you.
Do I need planning permission for a home EV charger?
In most cases, no. Home EV chargers usually count as permitted development in the UK. Listed buildings, conservation areas and some flats can differ, so check with your local authority first if your home falls into one of those.
Can I charge my EV from solar panels?
Yes, with a solar compatible charger. It measures the surplus power your panels produce and sends it into your car instead of exporting it to the grid. Browse our solar EV chargers.
Which EV chargers work with Octopus tariffs?
Many smart chargers work with Octopus tariffs, and some are approved for Intelligent Octopus Go. Check the product specifications for tariff support before you buy.
“Perfect! Great price and quick delivery”
“Really happy with the service from start to finish. The team made getting my EV charger installed easy and straightforward. They were professional and kept me updated throughout the whole process, which I appreciated. The installation was done quickly and to a high standard. It’s great to deal with a company that’s reliable, knowledgeable, and clearly cares about doing a good job. I’d definitely recommend them to anyone looking to get an EV charger installed - excellent service and a genuinely positive experience.”
“Great price and as fast to deliver as others. Will be using again. Thanks!”
“Great service & brilliant updates & communication with Jago. He talked us through the workings of Ev charger & reassured us we could contact him with any issues that may arise. Electricians did a great job..very pleased with the service we received. Thankyou”
“Fantastic service . Installed quickly and friendly service . Everything was explained during the process . Thank you very much”
“Couldn't recommend more, had my Andersen Quartz installed by ON-EV. Installed within 4 days of my enquiry, turned up on time, and finished within 2 hours. Jago showed me how to use the app, and gave some good tips. Spot on!”
“I had a Hypervolt installed at my property. I was very impressed with the prompt service. It's so neat! Thank you for your professionalism and advice. I would most definitely recommend.”
“Had ON-EV install a new EV charger at my house and couldn't be happier with the service. From start to finish everything was straightforward and professional. Communication was spot on, they turned up when they said they would, and the installation itself was done to a really high standard. They took the time to explain how everything works and made sure I was happy before leaving. Charger looks great and works perfectly.”
“Couldn't recommend enough, quick and easy process! Big thanks to Jago for making it as smooth as possible, setting up the app and organising it all. Also the lads doing the work were polite as anything and couldn't have been more helpful.”
“Not a straight forward installation- Jago came out to view, discussed what was required, and charger options. Quick installation. Friendly and Professional Electrician, made a very neat job of wiring and fitting our unit. Highly recommend.”
“We needed an ev charger installation around 16 metres from our house that required a cable to be buried under a shared drive. Jago project managed the whole operation with a ground work team and electricians. I've got to say that I had no previous experience of this company but the support was excellent. I have no hesitation in recommending ON-EV especially when the installation is a bit tricky!”
“ON-EV provided me with an excellent service. They offer a range of EV chargers at various prices and the overall cost including installation was very reasonable. The installation was professional and efficient. After, I was shown how to use the device and the app. I highly recommend using their service.”
“great service, after an email enquiry got back to me really fast, sent photos and measured up, date to booking was faster than every other quote in had. Came when they said, completed work in the day, all work complete, very smooth process. highly recommend theses guys.”
“Very impressed with my Zappi installation at my home in Cheshire, would definitely recommend”
“Absolutely delighted with the charger we had fitted yesterday. A very tidy and prompt installation and professional service.”
“Great price and as fast to deliver as others. Will be using again. Thanks!”
“Really happy with the service from start to finish. The team made getting my EV charger installed easy and straightforward. They were professional and kept me updated throughout the whole process, which I appreciated. The installation was done quickly and to a high standard. It's great to deal with a company that's reliable, knowledgeable, and clearly cares about doing a good job. I'd definitely recommend them to anyone looking to get an EV charger installed - excellent service and a genuinely positive experience.”
“Perfect! Great price and quick delivery”