Back to EV Charger Guides & Reviews

CT Clamp EV Charger: What It Measures and When You Need One

ON-EV
Hypervolt Home 3 Pro EV charger shown alone on a brand colour background

The Short Answer

A CT clamp is a small sensor that clips around a cable and reads the current passing through it. An EV charger uses that reading to follow spare solar power or to keep your home under its supply limit. A charger that does neither job has no use for one, so a clamp on your quote should match a feature you want.

What does a CT clamp measure?

A CT clamp, short for current transformer clamp, measures the electric current flowing through a single cable. It does not touch the copper. It closes around the outside of the cable and reads the current from there, then passes the number to the charger, which works out how much power the home is using.

The clamp reads current and nothing else. The charger decides what to do with the number. Where the clamp sits and how it connects depends on the charger, so the charger's own instructions set the position and whoever fits the charger carries it out.

How does a charger use a CT clamp to follow solar power?

A solar-following charger needs to know how much power your panels produce beyond what the house is using. The clamp supplies that reading. The charger then raises or lowers its output to match the surplus, so the car takes spare solar power instead of it going back to the grid.

The Zappi GLO has three solar modes, Fast, Eco and Eco+, and a CT clamp comes with it. The Hypervolt Home 3 Pro has three solar charging modes of its own, Eco, Boost and Super Eco. Both are worth a look on our solar compatible chargers page. The Zappi GLO review covers how that charger behaves day to day.

How does a CT clamp keep your home under its supply limit?

Dynamic load management lowers the charger's output when the rest of the house draws more power, so total demand stays under the supply limit and the main fuse does not trip. When the oven and kettle switch off, the charger can raise its output again.

Winter evenings are where this matters. Heating, cooking and a car on charge all land between 5pm and 8pm. The Hypervolt Home 3 Pro and the Zappi GLO both have 7.4kW / 32A single phase output, which is a large load to add to a busy evening. The Hypervolt Home 3 Pro provides dynamic load management through a supplied CT clamp. The Zappi GLO provides dynamic load balancing with a CT clamp included.

Which chargers on our shelves work with a CT clamp?

The Hypervolt Home 3 Pro and the Zappi GLO each come with a CT clamp, and the Easee Equalizer adds load management to Easee chargers. The table sets out what each one does and what it costs, using the variants we list.

Product Clamp Solar Load management Price
Hypervolt Home 3 Pro Supplied CT clamp Eco, Boost, Super Eco Dynamic £624.00 for the 5m Ultra White
Myenergi Zappi GLO CT clamp included Fast, Eco, Eco+ Dynamic load balancing £513.00 for the tethered (6.5m)
Easee Equalizer Not stated in our product details Solar PV integration when paired with a compatible charger Monitors total household current £124.00 for the 100A Single Phase
Clamp and solar modes

Hypervolt Home 3 Pro EV Charger

View Product →

The Hypervolt Home 3 Pro box includes the clamp, shown with the rest of the contents below. The Hypervolt Home 3 Pro review goes through the app and the tariff options.

What comes in the box layout showing the Hypervolt Home 3 Pro unit, tethered cable and CT clamp
Best for solar

Myenergi Zappi GLO EV Charger

View Product →

The Easee Equalizer is a different kind of product. It is a DIN rail mounted load management device that monitors total household current and adjusts the connected Easee charger output to prevent the main fuse from tripping. It is required to enable dynamic load management and solar charging on Easee chargers, and it works with Easee One, Charge Core, Charge Up, Charge Max and Charge Pro. We do not state that it uses a clamp. The Easee range guide compares those chargers.

Load management for Easee

Easee Equalizer | Load Management | Single & Three Phase

View Product →
Side by side of the Hypervolt Home 3 Pro and Myenergi Zappi GLO chargers with prices

Do you need a CT clamp for your charger?

You need a CT clamp when your charger must read the home's power, either to follow solar surplus or to share the supply with the rest of the house. If you want neither, the clamp adds nothing, and you can ask for a quote without it.

If a quote lists a clamp, put four questions to whoever wrote it:

  • Is the clamp there for solar, for load limiting, or for both?
  • Does the charger on the quote already come with one? The Hypervolt Home 3 Pro and the Zappi GLO do, so a separate clamp line may be a duplicate.
  • Does the charger offer the mode you want, such as a solar mode?
  • If the charger is an Easee, is the Equalizer on the quote?

Checklist of four questions to ask when a charger quote includes a CT clamp

Our guide to choosing a home EV charger sets these features against your tariff and parking. Clamps, load management units and similar parts sit in our charging accessories range.

Frequently Asked Questions

What does a CT clamp do on an EV charger?

A CT clamp reads the current in the cable it surrounds and passes that reading to the charger. The charger uses it to follow spare solar power or to keep your home within its supply limit.

Does the Hypervolt Home 3 Pro come with a CT clamp?

Yes. The Hypervolt Home 3 Pro has dynamic load management via a supplied CT clamp, alongside its Eco, Boost and Super Eco solar modes.

Can I add load management to an Easee charger?

Yes, with the Easee Equalizer. It is required to enable dynamic load management and solar charging on Easee chargers, and it is available as 100A Single Phase, 100A Three Phase and 500A Three Phase.

Vuoi installare il tuo caricatore per veicoli elettrici?

Installazione approvata OZEV in tutto il Nord del Galles e nel Nord Ovest. Preventivo gratuito, garanzia standard di 2 anni.

Richiedi un preventivo gratuito