Consumer Units & Circuit Protection
EV charger consumer units and RCBOs for a dedicated charging circuit. The range includes GARO, Timeguard and Matt:E consumer units and connection centres with PEN fault protection options, plus SEP single-phase and EMAT three-phase RCBOs from 16A to 40A.
-
Matt:E SP-EVCP Connection Centre | 32A with Terminals -
Matt:E SP-EVCP Connection Centre | 32A with Terminals | Load Limiting -
Matt:E SP-EVCP Connection Centre | 32A with Terminals | Load Limiting | Type A RCBO -
Matt:E SP-EVCP Connection Centre | 32A with DP Type A RCBO -
GARO CU 40A RCBO + SPD | PME PEN Fault Protection | Surge Protection | IP65 -
Timeguard EV Consumer Unit | 8 Module IP2X | 100A Type 2 SPD -
Timeguard EV Consumer Unit | 5 Module IP65 | 100A Type 2 SPD
Choosing an EV charger consumer unit or RCBO
An EV charger usually runs on its own protected circuit. A dedicated consumer unit or connection centre houses the protective devices close to the charger, and an RCBO combines overcurrent and residual current protection in one device. Your electrician decides the design under BS 7671.
What to check before buying
- Rating: Match the unit and RCBO to the charger current. Our RCBOs run from 16A to 32A single phase and 16A to 40A three phase.
- Single or three phase: SEP RCBOs are single phase. EMAT RCBOs are three phase. Check your supply before ordering.
- PEN fault protection: Some units, including the GARO 40A and Matt:E SP-EVCP, include PEN fault protection. Whether you need it depends on your earthing arrangement, so ask your electrician.
- Surge protection: The GARO unit includes an SPD. Timeguard offers a 100A Type 2 SPD.
- Enclosure: Timeguard units come as 5 module IP65 or 8 module IP2X. IP65 suits outdoor or exposed positions. The GARO unit is also IP65.
- Load limiting: Some Matt:E versions add load limiting or a Type A RCBO.
Pair protection with the right installation kits and cabling for the run. See also home chargers.
Common questions
Do I need a separate consumer unit for an EV charger?
Not always. Many installers add a dedicated way in the main board, and others fit a separate unit. Your electrician will advise based on space and supply.
What RCBO do I need for an EV charger?
It depends on the charger and the design. The RCBOs here are B-curve, 30mA, Type A from 16A to 32A. Your electrician confirms the rating and type.
What is PEN fault protection?
It detects a fault on the combined neutral and earth conductor of the supply and disconnects the charger. It is relevant for some earthing systems, so check with your electrician.
EV Charger Guides & Reviews
Tesla Mobile Connector or Wall Connector at Home: Which Do You Need?
A new Model 3 or Model Y owner can charge from a socket with the Tesla Mobile Connector. We set out where that works, where it runs short and when...
Tesla Mobile Connector or Wall Connector at Home: Which Do You Need?
|ON-EV