EV Charging Accessories
Upgrade your setup with reliable Type 2 cables and portable 3-pin chargers. Designed for seamless use at home or on the go. High-speed charging that’s built to last.
Shop by category
-
Type 2 EV Charging Cable ON-EV | 32A 7.4kW | Home & Public Charging -
Easee RFID Key Fobs | Access Control -
EV Charger Mounting Plate | Universal Wall Backplate -
Easee Equalizer | Load Management | Single & Three Phase -
EV Charger Cover | Weatherproof Wall-Mounted Charging Station Protection Hood -
Myenergi CT Clamp | 100A Current Transformer Clamp -
Project EV AC Current Sensor | CT Clamp -
EV Cable J-Hook | Heavy-Duty Wall Mount | For EV Charging Cables -
Myenergi eddi Single Phase Power Diverter | Solar & Excess Energy Diverter -
Myenergi libbi Foot Plate -
Myenergi eddi Relay Board | Expansion Module for eddi -
Myenergi eddi+ 3-Phase Power Diverter | Solar & Excess Energy Diverter -
Tesla Wall Connector Deep Blue Faceplate -
Evec vecGO 2.0 EV Charger Cover | Weatherproof -
Evec SIM Card | 1 Year Data Plan for VecGO & VecSPRINT Chargers -
Evec Paytec Contactless Payment Terminal Add-On -
Evec VecSPRINT Payment Terminal | Pedestal Contactless Pay-As-You-Go -
Evec VecSPRINT Payment Terminal | Wall Mounted Contactless Pay-As-You-Go -
Teltonika EVC1 Front Panel | Interchangeable Charger Cover -
NexBlue Zen Current Sensor | Three Phase | Dynamic Load Balancing Sensor -
NexBlue Zen Current Sensor | Single Phase | Dynamic Load Balancing Sensor -
NexBlue Cable Hook | Grey | Wall-Mounted Cable Storage -
Myenergi libbi Controller -
Myenergi libbi Top Plate
Common Questions
Do I need a professional to install my EV charger?
Yes - a home EV charger must be installed by a qualified electrician. The work must meet BS 7671 wiring regulations and Building Regulations. If you're claiming a government chargepoint grant, the installer must also be OZEV-authorised.
Can I get a government grant for my EV charger?
It depends on your property. The government EV chargepoint grant offers up to £500 until 31 March 2027 to renters and flat owners with off-street parking, and to some households with on-street parking. Homeowners living in houses aren't eligible. The installer must be OZEV-authorised. Check the current rules on GOV.UK.
What's the difference between a tethered and untethered charger?
A tethered charger has a cable permanently attached - you just unclip and plug in. Untethered has a socket so you supply your own Type 2 cable. Most home users prefer tethered for convenience. Untethered suits you if you drive more than one EV or want a cleaner look when the car isn't plugged in.
What's the difference between a 3.6kW and 7.4kW charger?
A 7.4kW charger is roughly twice as fast - 60kWh battery takes around 8 hours on 7.4kW vs 16 on 3.6kW. Most modern EVs and UK homes can handle 7.4kW on a standard single-phase supply, so unless your car or electrical setup limits you, go for the 7.4kW. It's the more future-proof option.
Do I need planning permission for a home EV charger?
In most cases, no. Home EV chargers fall under permitted development in the UK. The exceptions are listed buildings and some flats - if your property falls into either of those, check with your local authority before ordering.
Can I use my EV charger with solar panels?
Yes, and it's a great combination. Solar-compatible chargers like the Myenergi Zappi can detect excess energy from your panels and automatically divert it to charge your car - so instead of exporting it back to the grid, you're charging for free. If you have or are planning solar, look at our solar compatible range.