All
Shop Home and commercial EV chargers, and accessories from 7kW single-phase units to three-phase systems. With wide Fast delivery.
Shop by category
-
Easee U-Hook | Wall-Mounted Cable Storage -
EV Charger Mounting Plate | Universal Wall Backplate -
GARO GNM1D Single Phase Meter | 45A | RS485 Modbus | MID Approved -
Easee Ground Mount | Floor-Fixing Bracket -
GARO GNM1D Single Phase Meter | 100A | RS485 Modbus | Dynamic Load Management -
Easee Equalizer | Load Management | Single & Three Phase -
Small Bumper Barrier (Stainless Steel) -
Ground Box for Plinth Mounted Posts -
Value Bumper Barrier -
Tube Barrier -
GARO CU 40A RCBO + SPD | PME PEN Fault Protection | Surge Protection | IP65 -
GARO MCU 40A Type A RCBO | PME PEN Fault Detection | IP65 -
Diamond Box Barrier -
Value Square Post -
Small Wrap Around Barrier -
Matt:E SP-EVCP Connection Centre | 32A with Terminals | Load Limiting -
Protection Barrier with Signage – Square -
Wall Bracket (Standard Stainless Steel) -
Matt:E SP-EVCP Connection Centre | 32A with DP Type A RCBO -
Protection Barrier with Signage – Cylinder -
Matt:E SP-EVCP Connection Centre | 32A with Terminals -
Premium Stainless Steel Charger Post -
Easee Base | 1-Way, 2-Way & 4-Way Pedestal Mount -
Matt:E SP-EVCP Connection Centre | 32A with Terminals | Load Limiting | Type A RCBO
Common Questions
Do I need a professional to install my EV charger?
Yes - all home EV charger installations in the UK must be carried out by an OZEV-approved electrician. It's not just best practice, it's a legal requirement under BS 7671 wiring regulations. The charger also won't be eligible for the government grant unless an approved installer fits it.
Can I claim the OZEV grant when buying through ON-EV?
Yes. The OZEV EV Chargepoint Grant gives eligible homeowners up to £350 off the cost of buying and installing a home charger. To qualify you need to use an OZEV-approved installer - the grant covers both the unit and the labour. Your installer will usually handle the application for you.
What's the difference between a tethered and untethered charger?
A tethered charger has a cable permanently attached - you just unclip and plug in. Untethered has a socket so you supply your own Type 2 cable. Most home users prefer tethered for convenience. Untethered suits you if you drive more than one EV or want a cleaner look when the car isn't plugged in.
What's the difference between a 3.6kW and 7.4kW charger?
A 7.4kW charger is roughly twice as fast - 60kWh battery takes around 8 hours on 7.4kW vs 16 on 3.6kW. Most modern EVs and UK homes can handle 7.4kW on a standard single-phase supply, so unless your car or electrical setup limits you, go for the 7.4kW. It's the more future-proof option.
Do I need planning permission for a home EV charger?
In most cases, no. Home EV chargers fall under permitted development in the UK. The exceptions are listed buildings and some flats - if your property falls into either of those, check with your local authority before ordering.
Can I use my EV charger with solar panels?
Yes, and it's a great combination. Solar-compatible chargers like the Myenergi Zappi can detect excess energy from your panels and automatically divert it to charge your car - so instead of exporting it back to the grid, you're charging for free. If you have or are planning solar, look at our solar compatible range.